Sorry, this article is only available in Русский.
RESEARCH THE NUMBER OF GRAINS PER UNIT MASS OF GRINDING POWDERS OF SILICON CARBIDE BLACK
Aleksandrov Aleksey Aleksandrovich
Volzhsky Polytechnic Institute (branch) of Volgograd State Technical University
graduate student of VTO Department
Volzhsky Polytechnic Institute (branch) of Volgograd State Technical University
graduate student of VTO Department
Abstract
Number of grains per unit weight of the powder grinding is counted with all its fractions obtained according to GOST R 52381-2005 sieving on control sieves. The number of grains counted manually after weighing grain samples on analytical scales. A comparison of these data with studies of grinding powders obtained by outdated standards on grain composition is done: GOST 3647-80, GOST 3647-71. To verify the published formulas we measured the length and width of grain fractions of grinding powders.
Keywords: faction, grain, grain length and width, grinding powders, number of grains per unit mass, silicon carbide black
Category: 05.00.00 Technical sciences
Article reference:
Research the number of grains per unit mass of grinding powders of silicon carbide black // Modern scientific researches and innovations. 2016. № 12 [Electronic journal]. URL: https://web.snauka.ru/en/issues/2016/12/75793
View this article in Russian
© If you have found a violation of copyrights please notify us immediately by e-mail.