Sorry, this article is only available in Русский.
THE USE OF INFORMATION TECHNOLOGIES IN THE METROLOGICAL PROVISION OF PRODUCTION PROCESS
Bavykin Oleg Borisovich
Moscow Polytechnic University
PhD in Technical Science, Assistant Professor of Department of Standardization Metrology and Certification
Moscow Polytechnic University
PhD in Technical Science, Assistant Professor of Department of Standardization Metrology and Certification
Abstract
The article suggested the direction of automation of metrological support at the stage of production. As the object of automation is selected the calibration. The developed computer program that allows you to increase the simplicity and reduce the complexity of verification. The program is based on the revealed regularities in the execution of verification.
Keywords: calibration, calibration methodology, caliper, Delphi, metrological assurance, metrology
Category: 05.00.00 Technical sciences
Article reference:
The use of information technologies in the metrological provision of production process // Modern scientific researches and innovations. 2016. № 10 [Electronic journal]. URL: https://web.snauka.ru/en/issues/2016/10/72640
View this article in Russian
© If you have found a violation of copyrights please notify us immediately by e-mail or feedback form.
Contact author (comments/reviews)
Write comment
You must authorise to write a comment.
Если Вы еще не зарегистрированы на сайте, то Вам необходимо зарегистрироваться: