Sorry, this article is only available in Русский.
ADAPTIVE CONTROL SYSTEM OF PROCESSING OF DETAILS OF DEVICES IN THE CONDITIONS OF THE AUTOMATED PRODUCTION
Andryeyev Aleksandr Aleksyeyevich1, Shevchenko Vadim Vladimirovich2
1National technical university of Ukraine «Kyiv polytechnic institute», undergraduate
2National technical university of Ukraine «Kyiv polytechnic institute», Ph.D., associate professor
1National technical university of Ukraine «Kyiv polytechnic institute», undergraduate
2National technical university of Ukraine «Kyiv polytechnic institute», Ph.D., associate professor
Abstract
In this work the adaptive control system of processing in the conditions of the automated production which is based on measurement of a signal of acoustic emission and infrared radiation is considered. With it's help the effective forecast of operability of the cutting tool and control of intensity of it's wear is made, thus avoiding a tool failure, increasing quality, efficiency, reliability and accuracy of processing of details in instrument making.
Keywords: acoustic emission, Adaptive control system, control subsystem, cutting tool, infrared signal, wear
Category: 05.00.00 Technical sciences
Article reference:
Adaptive control system of processing of details of devices in the conditions of the automated production // Modern scientific researches and innovations. 2015. № 6. P. 1 [Electronic journal]. URL: https://web.snauka.ru/en/issues/2015/06/54540
View this article in Russian
© If you have found a violation of copyrights please notify us immediately by e-mail or feedback form.
Contact author (comments/reviews)
Write comment
You must authorise to write a comment.
Если Вы еще не зарегистрированы на сайте, то Вам необходимо зарегистрироваться: