Sorry, this article is only available in Русский.
DETERMINING THE CONTACT PRESSURE IN THE STRIP DURING ROLLING ROLLS WITH INVERSE CONICITY
Sundetbayeva Maral Amanturlievna1, Ashkeev Zhasulan Amanzholovich2
1Karaganda state technical University, Karaganda, Kazakhstan, Bachelors, masters specialization "Metallurgy"
2Karaganda state technical University, Karaganda, Kazakhstan, Ph.D., Associate Professor of "Metallurgy, Material Science and Nanotechnology"
1Karaganda state technical University, Karaganda, Kazakhstan, Bachelors, masters specialization "Metallurgy"
2Karaganda state technical University, Karaganda, Kazakhstan, Ph.D., Associate Professor of "Metallurgy, Material Science and Nanotechnology"
Abstract
The article describes the determination of specific and total effort by rolling strips in rolls with a reverse taper. Analysis of the formulas for determining the contact pressure shows a slight decrease in the contact pressure when rolling in a reverse taper rollers, which is primarily due to a decrease of the contact friction forces, since the value of δ * depends on the angle θ, characterizing the difference between the diameters of the rolls and, in turn, form the deformation zone.
Category: 05.00.00 Technical sciences
Article reference:
Determining the contact pressure in the strip during rolling rolls with inverse conicity // Modern scientific researches and innovations. 2015. № 6. P. 2 [Electronic journal]. URL: https://web.snauka.ru/en/issues/2015/06/54219
View this article in Russian
© If you have found a violation of copyrights please notify us immediately by e-mail.