METHODS OF CALCULATING THE HANGING MEMBRANE OF COATING FACILITIES, TAKING INTO ACCOUNT ELASTIC-PLASTIC DEFORMATIONS USING LINEAR SPLINES

Dol Dmitry Viktorovich1, Kim Yuri Valentinovich2, Shumeyko Galina Semenoovna3
1Volga branch of Moscow State University of Railway Transport, Ph.D., assistant professor of "Theoretical and Applied Mechanics" department
2Volga branch of Moscow State University of Railway Transport, Doctor of science, Full Professor
3Russian open Transport Academy of Moscow State University of Railway Transport, Ph.D., assistant professor of "Theoretical and Applied Mechanics" department

Abstract
This article is devoted to a calculation method of hanging thin membrane covering single-span facilities on static action force, temperature and other stresses, taking into account the geometric nonlinearity of the system and the physical nonlinearity of the material of membranes.

Keywords: calculation of a hanging membrane, geometric nonlinearity, membrane calculation, method of serial increments of parameters, physical nonlinearity and coating facilities

Category: 05.00.00 Technical sciences

Article reference:
Methods of calculating the hanging membrane of coating facilities, taking into account elastic-plastic deformations using linear splines // Modern scientific researches and innovations. 2014. № 2 [Electronic journal]. URL: https://web.snauka.ru/en/issues/2014/02/31749

View this article in Russian

Sorry, this article is only available in Русский.


All articles of author «Доль Дмитрий Викторович»


© If you have found a violation of copyrights please notify us immediately by e-mail or feedback form.

Contact author (comments/reviews)

Write comment

You must authorise to write a comment.

Если Вы еще не зарегистрированы на сайте, то Вам необходимо зарегистрироваться: